BLUESHAPE BV100HD PLUS 14.4V V-Mount 96Wh Li-Ion Battery with GRANITE LINK

The 14.4V V-Mount 96Wh Li-Ion Battery with GRANITE LINK from BLUESHAPE is designed to push a lot of power from a small chassis that is robust, yet matches with the form factor of compact video and cinema gear. On the outside, these batteries are designed for the rigors of a film or video set. The textured finish is easy to grab and is resistant to blemishes from drops and impacts. Both the interior and exterior have been tested to survive vertical drops onto hard surfaces. The reinforced V-mount will accept a charge from most standard chargers, though a separately available BLUESHAPE V-mount charger is recommended.

Power-hungry cameras and lights can draw up to 20 amps, between the main battery output and the two D-Tap ports on the sides. In addition to outputting 14.4V power, the right-side D-Tap port can serve to charge the battery with a separately available D-Tap charger. As an extra measure of protection, the D-Tap ports have rubber covers that help maintain the IP54 resistance rating against moisture and dust ingress.

While the LED battery meter is useful and convenient, BLUESHAPE offers a free iOS/Android app that can monitor and control various aspects of the battery, completely wirelessly, over Wi-Fi. The app updates in real time based on current capacity, charging speed, and power draw. On set all batteries can be monitored on the same network, so not only do you know when to grab a fresh battery ahead of time, but which battery is ready to go without having to play a guessing game.

Practical Use-Cases
An operator, camera assistant, or technical director can easily monitor the state of batteries in close proximity without having to physically press the button to check on the actual battery. Multiple batteries can be monitored simultaneously from a single device. Additional features through the app allow you to identify, lock, unlock, and connect to a different network. A Rental mode is available to limit the period of use when the battery is leased.

Networking
Batteries can create their own Wi-Fi network for single battery monitoring, or they can be connected to a master Wi-Fi network. A fleet of batteries can be easily monitored by multiple devices without complicated pairing procedures. Batteries can be given custom names for easy identification.

Internal Modular Design
The lithium-ion cells are secured inside the pack in a carefully designed and reinforced modular cage. All the metal interconnections and the electronic monitoring board are integrated with the cells making a single core. No otherwise vulnerable wiring is used. The metal cell-to-cell tabs have been thickened using a low-resistance alloy.

Solid External Construction
The external V-mount is screwed to the inner core by means of a reinforced metal plate at the base of the battery casing. The outer battery pack shells wrap the inner core and secure it with eight perimeter screws. A colored rubber gasket is sandwiched in the middle of the outer shells to improve weather resistance and enhance the battery's aesthetics.

Features

96Wh Li-Ion V-Mount Battery
Supports 6.7A Continuous Draw
Wi-Fi Smartphone App Control
LED Power Gauge
Shockproof and IP54 Certified
2 x D-Tap Accessory Outputs
Supports Charging via One D-Tap

Specification

Mount / Series Type V-Mount
Chemistry Lithium-Ion
Capacity (Wh) 96 Wh
Amp-Hours 6.7 Ah
Output Voltage 14.4 VDC
Maximum Load 20 A
Accessory Port 2 x D-Tap Output
IP Rating IP54
Dimensions (W x H x D) 6.73 x 3.74 x 1.46" / 17.1 x 9.5 x 3.7 cm
Weight 1.7 lb / 0.77 kg