Switronix Recon X5 HD-SDI Modular Wireless TX/RX System with V-Mount

The Recon X5 HD-SDI Modular Wireless TX/RX System with V-Mount from Switronix is a transmitter and receiver set that wirelessly sends SD/HD-SDI video, along with embedded audio, over 150m from a camera to a monitor. The signal is transferred uncompressed and with a latency of less than one video frame at 60fps, allowing for real-time monitoring. Transmitted data is encrypted for security.
A graphical interface on the receiver lets you switch from auto frequency selection or manually select a 5.1 to 5.9GHz channel. You can also name transmitters and receivers, select latency, and adjust settings. The ability to name transmitter and receivers is particular useful on multi-camera shoots. You can even use the receiver as a camera feed switch and choose between feeds from multiple transmitters on set.
The receiver is powered by a V-Mount battery using the attached battery plate, or from other external sources via a 6-pin 2B LEMO connection. The transmitter features 2-pin Amphenol connector for direct wiring to the back of a JetPack X or ENG camera. Additionally, you can mount an optional Switronix V-Mount or 3-Stud battery plate to the back of the transmitter.

Key Features
150m real-time transmission from camera to monitor
SD/HD-SDI input and loop through output on transmitter
Two SD/HD-SDI outputs on receiver
Sends uncompressed HD video with embedded audio
Latency is less than one video frame at 60fps
Receiver powered by V-Mount battery
Transmitter with 2-pin Amphenol connector for direct wiring to the back of a JetPack X or ENG camera
Three 1/4"-20 threads on bottom of transmitter and receiver; one centered and two 18mm apart for adding rod mounts

Specs